Scheppach 5907803901, Translation Of Original Operating Manual

Page: 17 / 112


www.scheppach.com /

service@scheppach.com /

+(49)-08223-4002-99 /

+(49)-08223-4002-58
GB | 17
In addition to the safety notices contained in this
operating manual and the particular instructions for
your country, the generally recognised technical reg -
ulations for the operation of identical devices must
be complied with.
We accept no liability for accidents or damage that
occur due to a failure to observe this manual and the
safety instructions.
2. Unpacking
• Open the packaging and remove the device care-
fully.
• Remove the packaging material as well as the
packaging and transport bracing (if available).
• Check that the delivery is complete.
• Check the device and accessory parts for trans -
port damage.
• If possible, store the packaging until the warranty
period has expired.
ATTENTION!
The device and packaging materials are not toys!
Children must not be allowed to play with plas-
tic bags, film and small parts! There is a risk of
swallowing and suffocation!
3. Description of parts (fig. 1)
1. Mixing paddle
2. Agitator, left-turning
3. Drive shaft
4. 2-speed switch
5. Handle
6. Motor
7. ON I OFF switch
8. Circuit breaker for ON/OFF switch
9. Speed controller
4. Intended use
The machine has been designed to mix liquid and
powdery building materials such as paint, mortar, ad -
hesive, plaster and similar substances. The relevant
mixing action (which depends on the consistency of
the materials and the quantity that has to be mixed)
must be set up for the appropriate mixing tool.
The equipment is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the manufac-
turer will be liable for any damage or injuries of any
kind caused as a result of this.
1. Introduction
Manufacturer :
scheppach
Fabrikation von Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear customer ,
We hope your new tool brings you much enjoyment
and success.
Note :
According to the applicable product liability laws, the
manufacturer of the device does not assume liability
for damages to the product or damages caused by
the product that occurs due to:
• Improper handling,
• Non-compliance of the operating instructions,
• Repairs by third parties, not by authorized service
technicians,
• Installation and replacement of non-original spare
parts,
• Application other than specified,
• A breakdown of the electrical system that occurs
due to the non-compliance of the electric regu-
lations and VDE regulations 0100, DIN 57113 /
VDE0113.
We recommend :
Read through the complete text in the operating in-
structions before installing and commissioning the
device.
The operating instructions are intended to help the
user to become familiar with the machine and take
advantage of its application possibilities in accord-
ance with the recommendations.
The operating instructions contain important infor-
mation on how to operate the machine safely, pro -
fessionally and economically, how to avoid danger,
costly repairs, reduce downtimes and how to in -
crease reliability and service life of the machine.
In addition to the safety regulations in the operating
instructions, you have to meet the applicable regula -
tions that apply for the operation of the machine in
your country.
Keep the operating instructions package with the
machine at all times and store it in a plastic cover to
protect it from dirt and moisture. Read the instruction
manual each time before operating the machine and
carefully follow its information. The machine can only
be operated by persons who were instructed con -
cerning the operation of the machine and who are in-
formed about the associated dangers. The minimum
age requirement must be complied with.