Scheppach 5906706901, Instruction Manual, Page: 27 / 196

www.scheppach.com
GB | 27
Improper handling of waste equipment may have
negative consequences for the environment and hu-
man health due to potentially hazardous substances
that are often contained in electrical and electron-
ic equipment. By properly disposing of this product,
you are also contributing to the effective use of nat -
ural resources. You can obtain information on collec-
tion points for waste equipment from your municipal
administration, public waste disposal authority, an
authorised body for the disposal of waste electri -
cal and electronic equipment or your waste disposal
company.
17. Troubleshooting
The table below contains a list of fault symptoms and explains what you can do to remedy the problem if your equipment
fails to work properly. If the problem still persists after working through the list, please contact your nearest service work -
shop.
Fault Possible cause Remedy
Diamond cutting disc comes off
when motor is deactivated.
Fastening nut not tightened properly Tighten fastening nu
When motor is deactivated.
Failure of mains circuit-breaker Check mains circuit-breaker
Extension cable defective Replace extension cable
Connection with motor or switch is not OK Have it checked by an electrician
Motor or switch Is defective Have it checked by an electrician
Motor has no output
Cross-section of the extension cable Is not
sufficient
See electrical connection, the fuse has
blown
Overloading Check tool