www.scheppach.com /
+(49)-08223-4002-99 /
+(49)-08223-4002-58
GB | 41
Batteries and rechargeable batteries do not be-
long in the household waste!
As the consumer you are required by law to
bring all batteries and rechargeable batteries,
regardless whether they contain harmful sub-
stances* or not, to a collection point run by the local
authority or to a retailer, so that they can be disposed
of in an environmentally friendly manner.
*labelled with: Cd = cadmium, Hg = mercury, Pb =
lead
• Remove the batteries from the laser before dispos-
ing of the machine and the batteries.
tentially hazardous substances that are often con-
tained in electrical and electronic equipment. By
properly disposing of this product, you
are also contributing to the effective use of natu-
ral resources. You can obtain information on collec-
tion points for waste equipment from your municipal
administration, public waste disposal authority, an
authorised body for the disposal of waste electri-
cal and electronic equipment or your waste disposal
company.
13.
Troubleshooting
The table below contains a list of fault symptoms and explains what you can do to remedy the problem if your equip-
ment fails to work properly. If the problem still persists after working through the list, please contact your nearest ser-
vice workshop.
Fault
Possible cause
Remedy
Machine does not start •
Battery empty
•
Battery is not correctly inserted
•
On/Off switch faulty
•
Worn carbon brushes
•
Motor faulty
•
Charge battery
•
Remove battery and insert again
•
Contact the service centre
•
Contact the service centre
•
Contact the service centre
Machine works with
interruptions
• Power cable damaged
• Internal connections are loose
• On/Off switch faulty
• Check the extension lead and have it replaced,
if required
.
• Contact the service centre
• Contact the service centre
Poor cutting quality
• Blades are blunt.
• Have the blades sharpened or the knife bar
replaced.
Motor is running but
the gears are not
engaging
• The power unit is jammed by a thick
branch or other objects.
• Turn the hedge trimmer off immediately,
disconnect the electricity supply and remove
the blockage.
Pole saw does not
saw, it plucks or
vibrates.
• Chain tension too high.
• Chain blunt.
• Chain attached incorrectly.
• Chain worn.
• Check and reset chain tension.
• Have the chain sharpened or replace it.
• Re-attach the chain.
• Replace the chain.