3
– PRODUCT PRESENTATION
COD.150Z230.B.2021
EN
THE PRESENT MANUAL BELONGS TO -
Schenker Italia
- ALL RIGHTS RESERVED
11
Weight
46,1 Kg (empty)
Hydraulic Connection
Seawater inlet:
hose barb for 20mm internal diameter reinforced hose.
Brine Discharge:
hose barb for 16mm internal diameter reinforced hose.
Fresh water:
¼’’ fitting, 6x8mm hose.
PUMP
Dimensions
Length:
42 cm
Width:
15 cm
Height:
23 cm
Weight:
14,3 Kg
Hydraulic Connection
Water inlet:
hose barb for 20mm internal diameter reinforced hose.
Water outlet:
hose barb for 16mm internal diameter reinforced hose.
Feed pump type:
Rotary vane pump
Motor type:
4 poles 230 VAC single phase
Filters:
n. 1
Cartridge filter 5 microns 2.32" x 9 ¾’’
n. 1 Active carbon filter
2.32" x 9 ¾’’
Motor power supply:
230 V AC single phase (100S230 version)
Computer power supply:
12-24 VDC +/- 15%
Average electric consumption
: 600 Watth average
Nominal fresh water production:
150 Lit/h +/- 20% @ seawater 25 °C salinity 35.000 ppm
CEE conformity
:
In compliance with directives 89/392 CEE sect.1 (general safety machines
requirements), 89/336 CEE (electromagnetic compatibility), 73/23 CEE
(electric safety requirements)
3.6 Features of the product
The water produced by a Schenker plant, produced from clean seawater has a high purity but the potability
may not be guaranteed as bacterium may be present in the watermaker, caused by non-observance of
shutdown and cleaning procedures. It is essential that correct shut down and storage procedures are followed
to ensure continued purity of the product water. UV treatment of the product water may be beneficial.
