manualshive.com logo in svg

Schenker W504, User Manual

Share
Download
Schenker W504 User Manual Download Page 171

Upgrading The Computer

Upgrading the Optical Device 6 - 9

6

Upgrading the Optical Device (Models E & F)

1.

Turn the computer off, remove the AC/DC adapter (and battery) and turn the computer over.

2.

Locate the 

secondary

 hard disk bay cover and remove screws 

 & 

.

3.

Remove the hard disk bay cover.

4.

Remove the screw at point 

, and use a screwdriver to carefully push out the 

optical device out of the bay.

5.

Reverse the process to install any new optical (CD/DVD) device.

Figure 6 - 5

Removing the 

Optical (CD/DVD) 

Device

(Models E & F)

1

2

3

1

2

3

Note that though only 

Model F

is pictured, the cover removal
procedure is identical for all
both models. 

Summary of Contents for W504





























































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands