scheider electric MiCOM P746, Technical Manual

Page: 507 / 530

Cyber Security P746/EN CS/G31
MiCOM P746 (CS) 17-5
CS
3. STANDARDS
There are several standards, which apply to substation cyber security (see Table 1).
Country
NERC CIP (North American Electric
Reliability Corporation)
USA
Framework for the protection of the
grid critical Cyber Assets
BDEW (German Association of Energy
and Water Industries)
Germany
Requirements for Secure Control
and Telecommunication Systems
ANSI ISA 99 USA
ICS oriented then Relevant for EPU
completing existing standard and
identifying new topics such as patch
management
IEEE 1686 International
International Standard for substation
IED cyber security capabilities
IEC 62351 International
Power system data and Comm.
protocol
ISO/IEC 27002 International
Framework for the protection of the
grid critical Cyber Assets
NIST SP800-53 (National Institute of
Standards and Technology)
USA
Complete framework for SCADA
SP800-82and ICS cyber security
CPNI Guidelines (Centre for the
Protection of National Infrastructure)
UK
Clear and valuable good practices
for Process Control and SCADA
security
Table 1: Standards applicable to cyber security
The standards currently applicable to Schneider Electric IEDs is NERC and IEEE1686.