RADIO OPERATION
AUTOMATIC TUNING
MANUAL TUNING
It is for selecting stations, which cannot be tuned automatically. (manual selection)
To tune a channel manually.
1. Press the “FUNCTION” button to select “TUNER” mode.
2. Adjust the frequency by pressing “SKIP +” or “SKIP -” the frequency changes by a fixed step:
FM: 0.1 MHz steps
1. Press the “FUNCTION” button to select “TUNER” mode.
2. Press and hold the “SKIP +” or “SKIP -” button over 3 seconds to start automatic tuning process.
3. When a station is tuned in the tuning process, it will stop automatically and you can listen to your
desired station.
MEMORY PRESET
1. Repeat step 1 to 3 in the AUTOMATIC TUNING procedures.
2. Press the “MEMORY” button on the remote to start the preset process.
3. Display will show the memory sequence number and a flashing “01”.
4. Press the “PRE-UP” or “PRE-DN -” button on the remote to determine the preset
station number.
5. Press again the “MEMORY” button on the remote to preset your desired station.
6. Once all the stations were preset, press the “PRE-UP” or “PRE-DN -” button on the remote
Notes:
FM can be stored up to 30 stations.
to listen to your desired station.
MONO / STEREO
Press the “MONO / ST.” button to achieve the best frequency.
E-5
