English
- 82 -
This means that the connection is now established.
To disconnect from a wireless network, you should
highlight
Con
fi
guration Status
and press
OK
.
You can navigate between menu tabs by pressing left/
right buttons. The help bar on the bottom of the dialog
shows features that you may use. Press
BLUE
button
to check your internet connection speed.
You can check the signal strenght by using the network
settings menu for the wireless device mode.
Information
Configuration Status
: Displays wi-fi status as
connected or not connected.
IP Address
: Displays the current IP address.
Network Name
: Connected networks’ name will be
displayed.
Delete Saved Wi
fi
Pro
fi
les
Saved pro
fi
les will be deleted if you press red button
while wireless device selection osd is on the screen.
Connecting to your Cell Phone via WiFi
(Optional)
If your cell phone has WiFi feature, you can connect
•
your cell phone to your TV by using WiFi connection
via a router, in order to play content from your phone.
For this, your cell phone must have an appropriate
sharing software.
Connect to your router following the steps stated
•
above in the Wireless Connection section.
Afterwards, engage your cell phone with the router
•
and then activate sharing software on your cell
phone. Then, select
fi
les that you would like to share
with your TV.
If the connection is established correctly, you should
•
now access the shared
fi
les of your cell phone via
the Media Browser of your TV.
Enter Media Browser menu and playback device
•
selection OSD will be displayed. Select your cell
phone’s ident and press
OK
to continue.
Note: This feature may not be supported by some
cell phones.
Con
fi
guring Other Settings
To view general con
fi
guration preferences, select
Other Settings
in the Settings menu and press
OK
button.
Operation
Press “
•
” or “ ” buttons to select an item.
Use “
•
” or “ ” button to set an option.
Press
•
OK
button to view a sub-menu.
Menu Timeout
: Changes timeout duration for menu
screens.
Active Antenna:
This feature enables or disables
the use of active antennas. When antenna power
option is set as On, +5V will be transmitted to the
antenna output.
IMPORTANT:
Antenna power should be Off when
standard antenna is used instead of the active
antenna.
Scan Encrypted
: When this setting is on, search
process will locate the encrypted channels as well. If
it is set as
Off
, encrypted channels will not be located
in automatic search or manual search.
Blue Background
: Activates or deactivates blue
background system when the signal is weak or
absent.
Software Upgrade
: To ensure that your TV always
has the most update information, you can use this
setting. In order for the proper operation, please
ensure that the TV is set to standby mode.
A02_[GB]_MB70_5112UK_DVBT_C_S2_32884W_GOLD11_10076633_50207316.indd 82
A02_[GB]_MB70_5112UK_DVBT_C_S2_32884W_GOLD11_10076633_50207316.indd 82
07.12.2011 13:49:46
07.12.2011 13:49:46
Summary of Contents for 32LT581CT
Page 1: ...32LT581CT SI Bedienungsanleitung Istruction Manual ...
Page 94: ...50207316 ...