•
Keep remotes out of reach of children.
•
Remote controls may only be operated by persons who are familiar with the system and have
been instructed
in their function.
•
Use the remote control only when you are in sight of the door / gate.
•
Coding in remote controls must always be carried out within the vicinity of the door operator. Use
only original
parts.
•
Protect remotes from rain, snow, sunlight or dust, otherwise the function of the transmitter may
be impaired
•
To replace the battery, unscrew the screws on the back of the remote.
Programming Video
Please visit www.schartec.de/en
Simplified EU Declaration of Conformity (CE)
Schartec hereby declares that the remote control YET
2128
-E
complies with Directive 2014/53/EU. The full text of the EU Declaration of
Conformity is available at the following Internet address: www.schartec.de/en
Information about battery regulation
As a dealer for the distribution of electronic, battery-operated devices, we are obliged by law to inform our customers about the following:
Electrical and electronic devices, as well as batteries, must not be disposed of as household or residual waste, but must be delivered in the
appropriate acceptance and collection points will.
The complete version of the battery law can be found here:
http://www.gesetze-im-internet.de/bundesrecht/battg/gesamt.pdf
Schartec
Remote Control
YET
2128
-E
SCHARTEC
a trademark of
bau-shop-24 GmbH
Fritz-Müller-Strasse 115
73730 Esslingen
Germany
WEEE Reg. Nr.: DE90317979
BattG Reg. Nr.: 21008776
Frequen
cy
:
433.92
MHz
Rolling-Code
dBm:
1
0
Power Consumption:
≤ 12 mA
Channels
:
4
Batter
y
:
CR2016 3V (2x)
Working temperature
:
-
2
0°C
to
+
6
0°C
Article number
:
ST
3010
25
Model
num
b
er:
YET
2128
-E
Programming:
1.
Briefly press the P key (learn key / code key) on the door
operator
- the LED on the
operator
will begin
to flash.
2.
Briefly press the desired button o
n
the YET
2128
-E once. Within the next 5 seconds, press
the
button again.
T
he LED on the
operator will begin to
flash
quickly
a
nd
then
go out.
3.
The YET
2128
-E remote is now coded to the operator.
