FST-03 Remote Control
ST104032
Frequency: 433.92 MHz Rolling-Code
Channels: 4
Battery: 12V/27A
Bandwidth: 180 kHz
Working Temperature: -40°C - +50°C
•
Keep remotes out of reach of children
•
Remote controls may only be operated by persons who are familiar with the system and have been instructed
in their function
•
Use the remote control only when you are in sight of the door / gate
•
Coding in remote controls must always be carried out within the vicinity of the door operator. Use only original
parts
•
Protect remotes from rain, snow, sunlight or dust, otherwise the function of the transmitter may be impaired
•
To change the battery, loosen the screws on the rear of the remote
a) Press the "Code" key on the display of
your garage door
opener
. A dot (
.
)
will appear in the corner.
Now press the button on the remote you want to use, wait 2 seconds, then press and hold
the same button on the remote again for 2 seconds.
The dot (.) on the display will flash to confirm the code, then turn off. Repeat the process for additional remotes
that need to be stored.
WARNING!
When teaching in a remote, the operator may be accidentally triggered initiating door movement!
Simplified EU Declaration of Conformity (CE)
Schartec hereby declares that the radio equipment type FCT-03 complies with Directive 2014/53/EU. The full text of the EU Declaration of
Conformity is available at the following Internet address: www.schartec.de/en/
Information about battery regulation
As a dealer for the distribution of electronic, battery-operated devices, we are obliged by law to inform our customers about the following:
Electrical and electronic devices, as well as batteries, must not be disposed of as household or residual waste, but must be delivered in the
appropriate acceptance and collection points will.
The complete version of the battery law can be found here:
http://www.gesetze-im-internet.de/bundesrecht/battg/gesamt.pdf
Programming
b)
Schartec
a trademark of bau-shop-24
GmbH Fritz-Müller-Strasse 115
73730 Esslingen, Germany
