Camera Control and Performing a Scan
Instruction Manual
SK22368U3TOC
shar
ed_CameraContr
ol(1)_SkLineScan_ML.indd
11
Instruction Manual SK22368U3TOC © 2022-03 E
Visualization of the Sensor Output
•
Signal Window / Oscilloscope Display
The signal window plots the digitalized brightness profile as signal intensity (y-axis) versus the sensor length (x-axis)
at a high refresh rate. The scaling of the y-axis depends on the resolution of the A/D converter: The scale range is
from 0 to 255 for 8-bits and from 0 to 4095 for 12-bits. The scaling of the x-axis corresponds with the number of
pixels in the line sensor.
Platzhalter für Grafiken in anderen Ebenen
•
Zoom Function
With a high number of sensor pixels, details are lost due to the limited number of display pixels. With the zoom
function you select a part of the sensor for the detailed display. The possible magnification ranges up to the repre-
sentation of the intensity signal of individual pixels.
•
Window Split Function
The signal window can be divided horizontally into two areas. Use the slider
B
at the top of the vertical scroll bar.
If you then use the zoom function in one frame, the selected section in the other frame will be highlighted in yellow.
Platzhalter für Grafiken in anderen Ebenen
Line scan in split
signal window: The
upper frame shows
an enlarged section
of the lower frame.
Line scan in Signal
Window: brightness
vs. pixel number
B
