3- Assembling the lifting columns
•
Attach the lifting columns to
the assambled frame using the
eight screws and tighten all
screws with the Allen key.
5- Installing the fixing plate
•
Remove the screws in the
center part of the crossbar as
shown.
6- Installing the control unit
•
Connect all the wires to the control unit
as shown below, then slide the control
unit to the fixing plate.
4- Installing the feet
•
Place the feet on the columns
as shown.
•
Insert the screws as shown
and tighten them.
•
Attach the fixing plate to the frame using
the two removed screws and tighten all
screws with a proper screwdriver.
7-
Installing the cable management shelf
•
Loose and remove the screws
with a proper screwsdriver.
•
Fix the hooks to the shelf with
removed screws, tighten all the screws.