Schaerer Ambiente 2 Page 99 User Manual Download

Page: 99 / 130

Payment Systems

8.2.1.3. PROGRAM

card

In payment mode using MONEY cards, the PROGRAM card is used for statistical
purposes and for setting user-relevant data.

The PROGRAM card is an optional feature and is not included in the standard deliv-
ery package.

8.2.1.3.1. Menu

Enable/disable payment mode

Switch

prices

MONEY card price levels 1+2

Change token price with or without MONEY cards price levels 1+2.

Change product prices and article numbers (Only for external payment mode)

Display MONEY sales

Reset MONEY sales

Display MASTER sales

Reset MASTER sales

Log on MASTER card

Delete MASTER card table

Enable/disable

timer

Change PIN code

At the end of every menu:

Remove PROGRAM card

coffee machine ready in payment mode.

Press

[ ]

key to reach the next menu.

You will find a detailed description of how to use and program the coffee ma-
chine using the PROGRAM chip card in chapter 4.6.1.

BASO-2 - 02.08 - V08

Page 8-11

Summary of Contents for Ambiente 2



































































































































Search results

Summary of Contents for Ambiente 2

Reviews:

Related manuals for Ambiente 2

Brands by name

Popular brands

Schaerer Ambiente 2, User Manual

Search results

Summary of Contents for Ambiente 2

Reviews:

Related manuals for Ambiente 2

Brands by name

Popular brands