Operation
4.3
Messages displayed when espresso machine is ready for operation
Empty the grounds container. Up to five more espressos can be made; after that, the
espresso machine locks.
The temperature of an instantaneous water heater has fallen to more than 10°C below
the programmed value. Please wait until the machine has warmed up again before
dispensing the next product.
Start the cleaning program (cf.
5
"Cleaning"
, page
5-1
).
.....
Container full
.....
Heat up...
.....
clean machine
4.4 Routine
operation
Note:
For the functions described in this chapter, it is assumed that the espresso machine is
ready for operation. The display must show the following text:
select beverage
12:00 01.05.2003
Display example
4.4.1
Refilling of espresso beans
Both espresso bean containers (1) should only be filled with max. 1.8 lbs / 0.75 kg of
coffee beans each.
Note:
Never fill the espresso bean containers with a different product than roasted espresso
beans!
The espresso grinder is set for a specific espresso blend. When changing the blend,
the grinder and the dosing apparatus must be readjusted by a manufacturer-
authorized service technician.
Danger!
•
Never reach with your hands into the espresso bean container(s) when the
machine is switched on.
•
When refilling the bean container(s), do not reach into the grinder and do not
press a product button!
1.
Open the lid of the empty bean container.
2.
Refill with espresso beans (max. 1.8 lbs / 0.75 kg per container). Replace the
container lid.
4.4.2 Pre-checks
Prior to switching on the machine, check the following:
•
The fresh water supply is open
•
The espresso bean container(s) is (are) filled (cf.
•
The espresso sliding hatch is open.
•
The espresso grounds container has been emptied.
•
The espresso machine is connected to the power supply.
•
The following text must be shown on the (dark) display:
<<Standby>>
12:00 01.05.2003
Display example
BASO-1 SUSA - 02.04 - V02
Page 4-3
