4
DESCRIPTION
Schaefer’s wall mounts offer the flexibility to
mount circulation fans up to 42" on a wide
variety of surfaces using four distinct mounting
configurations. Mounts allow for 180° swivel
adjustment from side to side with the capability
to tilt up to 45° to direct the air where desired.
Assembled in the USA of heavy-duty steel, these
mounts will provide years of dependable fan
support for your cooling and air circulation needs.
MOUNTING CONFIGURATIONS
Schaefer’s wall mount bracket can be assembled in two
configurations. Some configurations will limit the fan angle
adjustment range.
WALL BRACKET ASSEMBLY
Kit Contents:
Formed Bracket, Diagonal Brace, Swivel Tab
(2) 1/4"-20 x 3/4" Bolts, (2) 1/4"-20 Nylock Nuts, (4) 1/4" Washers
(1) 3/8"-16 x 1" Carriage Bolt, (1) 3/8"-16 Nylock Nut, (1) 7/16" Washer
Tools required:
(2) 7/16" Wrenches
(1) 9/16" Wrench
1. Orient the Formed Bracket and Diagonal
Brace so both hole patterns are aligned.
2. Join the Bracket and Brace with the 1/4"
hardware through the desired Swivel Tab end.
Use the 7/16" wrenches and tighten fasteners
securely.
3. Install the Yoke Mount using the 3/8"
hardware. Insert the 3/8" Carriage Bolt
through the Yoke Mount, through the 7/16"
washer and then through the top of the
bracket. Use a 9/16" Wrench to tighten the
bolt until the Yoke Mount is seated against the
bracket but still allows rotational movement.
Step 1:
Step 2:
Step 3:
Holes
align
Yoke
Mount
Specifications
Part Number
Maximum Fan* Size
Finish
WMTA24-B
12" - 24"
Powder Coated Black
WMTA24-SS
12" - 24"
Stainless Steel
WMTA30-B
12" - 30" (36")*
Powder Coated Black
WMTA30-SS
12" - 30" (36")*
Stainless Steel
WMTA36-B
12" - 36" (42")*
Powder Coated Black
* A larger fan can be mounted with a smaller mount, but it will have
limited swivel range of motion. Maximum fan weight: 75 lbs.
Long leg out,
short leg down
Short leg out,
long leg down
Carriage
Bolt
