– 2 –
– 3 –
WOLF PUP 8.10 HEIGHT EXTENDER
PARTS INCLUDED FOR
HEIGHT EXTENDER
6 - 1/4-20 x 1-3/4” Truss head bolts
2 - 1/4-20 x 1-1/2” Truss head bolts
2 - 1/4-20 x 2-1/2” Truss head bolts
1-
3
/
8
x 3-1/2” Hex head bolt
8 - 1/4” Flat washers
8 - 1/4” Wing nuts
2 - Extended outside treadles*
8 - Extended inside treadles*
10 - Extended treadle aid tie-ups*
80 - Extended tie-ups*
REUSED PARTS
4 - Barrel nuts
2 - 1/4-20 x 3” Truss head bolts
REQUIRED TOOLS
Phillips screw driver
9
/
16
” (or adjustable) wrenches
A
ssembly
I
nstructIons
= These parts are included in the kit
for
adding
a height extender. If you ordered
your loom
with
the height extender, these
parts will arrive attached to your loom.
*
treadles
treadle
support
lower left
front leg
upper left
front leg
brake
advance
lever
lower right
front leg
upper right
front leg
wheel
beater side
brake cord
warp beam
crank handle
fold bars
fold knob
beam knob
brake release
pedal
right rear
leg
left rear leg
beater top
reed
shafts
castle side
warp beam
rear beam
slide lock (visible from rear)
cloth beam
lamms
tie-up
cords
plastic
spacer
wooden
spacer
treadle
block
front beam
extension
front beam
front leg
sandwich block
rear leg brace
front leg
sandwich
block
FIGURE 1
