– 2 –
ARRAS BEAM KIT
A
ssembly
& W
Arping
1.
Remove the left leg from the loom:
Unscrew the two round plastic knobs that
hold the leg and foldable extension to the
left upright, as shown in Figure 1. (Leave
the leg extension knob in place; there’s
no need to disassemble the foldable
extension.) Remove the 3/8" USS metal
washers from the knobs but keep the
T-nut slides in place for the next step. You
can store the metal washers and the leg.
Watch videos on installing and warping with the Arras Beam Kit at
youtube.com/user/schachtspindle
i
nstAlling
the
b
eAm
K
it
on
An
A
ssembled
l
oom
PARTS
left and right bases
cross brace
left and right warp beam risers
2X
cloth/warp beams with ratchet
gears
2X
apron bars
2X
1/4-20 x 2-1/2" Phillips truss head
machine screws
2X
1/4-20 x 1-1/4" Phillips truss head
machine screws
4X
#8 x 1-1/4" Phillips truss head
sheet metal screws
4X
dowel handles
4X
3/8" Phillips truss head sheet
metal screws
8X
15-1/4" Texsolv apron cords
TOOLS REQUIRED
#2 Phillips screwdriver
You will also need the manual for the
Arras Tapestry Loom, available at
schachtspindle.com.
Phillips truss head
machine screw
Phillips truss head
sheet metal screw
To determine a screw's length, measure its shaft.
FIGURE 1: REMOVE THE LEFT LEG
leg extension & knob
left
upright
3/8" USS
washer
plastic knob
T-nut slide
