— 2 —
4- AND 8-SHAFT CRANBROOK LOOM PARTS
TOOLS REQUIRED
7/16" wrench
7/16" ratchet
9/16" wrench
3/4" ratchet
3/4" wrench
#2 Phillips screwdriver
rubber mallet
slotted (flat) screwdriver
metal tape measure
DEFINITIONS
The beater is at the front of the loom. The brake and worm gear are on the right side of the loom.
Mortise: A hole or cavity cut in a piece of wood prepared to receive a similarly shaped piece.
Tenon: A projection on the end of a piece of wood designed to fit into a hole or cavity of the same shape.
HARDWARE
Some hardware is already attached to the parts. Other hardware has been packaged in labeled bags for the parts they go with.
You’ll also find two Allen wrenches (sizes 5/16" and 5/32") in a hardware bag.
SMALL PARTS
4-shaft
quantity
8-shaft
quantity
12-treadle option
quantity
24
80
96
anchor pegs
24
80
96
tie-up cords (tied bundles of 12 each)
10
10
10
bundles of Texsolv heddles (1,000 total)
4
8
8
center support dowels
8
16
16
long metal shaft pins
8
16
16
short metal shaft pins
8
16
16
metal sleeves
center
support
dowels
bundles of Texsolv heddles
tie-up cords
anchor pegs
long metal
shaft pins
short metal
shaft pins
metal sleeves
allen wrenches 5/16" & 5/32"
