OPERATION
Once the unit is in the arena:
1. Raise the transport wheels fully by winding the wheel handles in a
clockwise direction until the wheels are fully retracted and the unit is
riding on its back and front crumble bars.
2. Remove the transport fixing pin so that the tow bar is
in its ‘floating
position’.
3. Using the crumble bar roller adjuster first lower the front crumble bar so
that the tines directly behind it go into the surface around 10mm. Then
repeat the same process for the rear crumble bar adjusting so that the
unit sits level to the eye and both front and back tines go into the
surface at approximately the same depth. It is best to gradually
increase the depth in stages of 10mm at a time.
