Before
After
Product Overview
The picture is for reference only.
Please check the actual model for specific functions.
Exterior plate
(Outside view)
Interior plate
(Inside view)
Setting Button
Up Button
：
Use it to add new keycards/
PIN codes
Down Button
：
Use it to delete keycards/
PIN codes
Battery Cover
Use the special tool provided
to open
Sensor
Keypad
PIN codes consist of 4~8
digits numbers can be
repeated
Confirm/Exit Button
Select Button
Keyhole Cover
Horizontally position the
key and turn the keyhole
cover 90 clockwise to
remove it then unlock with
the key
--Accessories--
Emergency Override Key
3 keys provided per lock
RFID Keycards
Door Lock Status
Type
Administrator
User
Single-Entry User
Volume
Quantity
Function
No.
Instruction
4 sets
94 sets
1 set
1 set
Add/Modify/Delete
Unlock the door
Can be used only
once
Sound volume
Unlocking Keycards or PIN codes.
Keycards or PIN codes be used
only once.
Types of No.
Status
Operation Successful
Operation Failed
Enter/ Exit Setup Mode
Low Battery
Door Opened Indication
Door Closed Indication
Light
Blue
Red
Blue / Red
Red
1 beep
3 beeps
2 beeps
5 continuous beeps
Sounds
1 beep after the right Keycard or PIN code that the lock is open.
After depressing the lever, the door is locked 1.5 seconds after
the lever comes back to the horizontal position.
Unlocking Methods
Notice
．
The factory default admin. PIN code is 123456. It is highly recommended to change the
code upon installation of the lock.
．
Only one PIN code or one Keycard can be set per No. of location.
．
Please turn to the last page to restore to the factory default settings.
．
There is no need to reset after battery replacement with the memory function.
•
It can’t enter the setup mode during passage mode.
1.Mechanical Key : Horizontally position the key and turn the keyhole cover 90 degrees
clockwise to remove it then unlock with the key.
2.Keycard : Press any button to enter the system, simply place the RFID card to the sensor.
3.PIN Code : Press any button to enter the system, enter assigned PIN code and press
to confirm.
4.Passage Mode : Place the RFID card to the sensor or enter assigned PIN code and press
. Press to lock.
＃
＊
＃
＊
＃
00~03
＊
04~97
＊
98
＊
99
＊
Electronic RFID
&
Keypad Door Lock
SKR600
Operation Manual
SKR600 Specification
Dimension -- Panels
：
290(H) x 70(W) x 72 (D)-(mm)
Approximate Weight
：
4520 g
Use 4AA Alkaline batteries (1.5V)
(not included)
Others
：
RFID Sensor
Digital Pad (Metal & Waterproof)
Door Thickness
：
45mm ~ 55mm
56mm ~ 80mm
Standard US Mortise Lockbody
Temperature
：
-10 C ~ 70 C
