-
12
-
www.SCEPTRE.com
SCEPTRE X372BV-FHD User Manual
Rear View Connections
1.
USB –
USB connects to USB flash drives for playing music and picture. The
USB port is also used for updating the TV’s firmware.
2.
HDMI1
– HDMI connects to devices that use HDMI cable, such as Blu-ray or
HD DVD player, or HD cable / satellite set-top box. This connection port
receives pure digital audio and high definition signal through one single cable.
This port also can accept a HDCP video device for video
.
3.
HDMI2
– Refer to HDMI1.
4.
HDMI3
– Refer to HDMI1.
5.
Audio In
- This connection port is for people who want to provide audio to the
TV when using a PC or a DVI video device. The sources use 3.5mm mini-jack
audio cable.
6.
VGA
- This connection port connects to a PC for video using VGA cable. Be
sure to connect your audio cable to the VGA Stereo input if you want sound
out of VGA video source.
7.
YPbPr 2
– This connection port is for DVD players or satellite / cable set-top
boxes that use component cables. From left to right, connect green, blue,
and red for video, and then connect red for right channel audio, and white for
left channel audio
8.
YPbPr 1
– This connection port is for DVD players or satellite / cable set-top
boxes that use component cables. From left to right, connect green, blue,
and red for video, and then connect red for right channel audio, and white for
left channel audio.
This connection shares audio red / white jacks with
the source VIDEO.
9.
LR –
This connection is for audio shared between the sources YPbPr1 and
Video.
10.
Video
– Video connects to devices that use composite video cables such as
VCR or DVD player or Wii™. Connect the yellow for video and the red / white
for audio.
11.
Audio Out
– This connection is for sending out analog audio signals to
surround sound receivers. Connect the red for right channel audio out and
white for left channel audio out.
12.
SPDIF
- This connection port is used for sending out digital audio signals to
digital surround sound receivers. The orange (COAX SPDIF OUT) connector
sends out either bit-stream or PCM digital sound signal to a home theater
receiver with digital coax input.
13.
HEADPHONE
– This connection is for headphones to be attached to the TV.
