-
46
-
www.SCEPTRE.com
SCEPTRE X325BV-FMQC User Manual
How do I clean the display ?
IMPORTANT
1.
The power cable has to be removed from the socket before cleaning the
display.
2.
Do not use volatile solvent (alcohol, rosin, and toluene) to clean the
display. These types of chemicals might damage the housing and the
LCD glass.
Cleaning the bezel and remote control
1.
Use a 100% cotton cloth or micro-fiber cloth for cleaning.
2.
If the remote control or bezel is dirty to the point where you cannot
simply dry wipe it, please lightly dampen the wiping material (
the wiping
material cannot be dripping wet, because if water drips into the
panel it will cause malfunction and possible permanent damage to
the panel which will not be covered under the warranty)
with clean
water and wipe again. Wipe the display with a dry micro-fiber cloth or
100% cotton cloth afterwards.
Please Note:
Make sure you wring the water out of the cloth before cleaning the
bezel or remote in order to prevent water from penetrating into the
electronics.
Cleaning the Screen
1.
Use a 100% cotton cloth or micro-fiber cloth for cleaning.
2.
The LCD screen glass is extremely fragile. Do not scrape it with any
material. Do not press or tap the screen to avoid cracking. When the
screen is dirty to the point where you cannot simply dry wipe it, please
lightly dampen the wiping material with clean water and wipe again.
Wipe the display with a dry micro-fiber cloth or 100% cotton cloth
afterwards.
