-
17
-
www.SCEPTRE.com
SCEPTRE UMS Series UHD Display User Manual
Mounting Specification:
400mm x 200mm
using 4 screws sized at
M6 (not included)
.
Top two mounting holes are 14mm deep and the bottom two mounting holes are 9mm
deep.
Rear View Mounting Pattern For U650CV-UMS
Mounting Specification:
400mm x 400mm
using 4 screws sized at
M6 (not included)
.
Length of screw should not exceed
20mm
. Please Note: The
20mm
length of screw
refers to how deep the screw can go inside the mounting holes. When you’re buying
screws, you should add the original 20mm to the thickness of your mounting plate in
order to get the total screw length.
Side Control Buttons
1.
VOL(+)
– This button increases the display’s volume. If a sub-menu
is active, pressing this button will move the select right.
2.
VOL(-)
– This button decreases the display’s volume. If a sub-menu
is active, pressing this button will move the selection left.
3.
CH(
▲
)
– This button changes the display channel up. If the OSD is
active, this button functions as up for the menu.
4.
CH(
▼
)
– This button changes the display channel down. If the OSD
is active, this button functions as down for the menu.
5.
– This button activates the On Screen Display (OSD). If a sub-
menu is active, pressing this button will exit the OSD.
6.
– This button switches between all the different sources of the
display. When the OSD is active, this button acts as the enter
button and confirms the menu selection.
7.
– Turn on the display by pressing the button once. Press the
button again to turn off the display.
