SCENTYS R'PULSE 150, User Manual

Page: 27 / 66

19/32
MKT/DOC/133/V0
18/32
MKT/DOC/133/V0
This screen will appear when the pump is switched
on.
The physical buttons are:
: Increase diffusion intensity or select tabs
or set time, date, etc.
: Decrease diffusion intensity or select tabs
or set time, date, etc.
: Go back, return to previous screen.
: Confirm selection / Go to main menu.
1/ Intensity settings
The length of diffusion is calculated based on increments of 120 sec. multiplied by
the % selected:
Diffusion length (s) = 120*%intensity
The length of pauses corresponds to the remainder of the diffusion period, or the time
available out of the 120 sec.:
Pause length (s): 120*(1-%intensity)
2/ Example of diffusion times
25% intensity
50% intensity
75% intensity
100% intensity
From the home screen:
Use
+
button to increase diffusion intensity.
Use the
–
button to reduce intensity.
After a few seconds, the pump will turn on and this
screen will appear.
It will show the following information:
1
st
line
Date and time and symbol indicating if the pump is
protected by a code.
2
nd
line
Diffusion intensity.
3
rd
and 4
th
lines
Start and end times if diffusion is programmed.
5
th
line
Directions for going to pump settings menu.
1 2
90 sec. 30 sec.
120 sec.
60 sec. 60 sec.
30 sec.
Diffusion time Pause time
90 sec.
U
SE
D
IFFUSION INTENSITY