4
PART#-31600035-LIT-SWD1001-MANUAL-REV.A
Wall Mounting Plate Installation
1. Install preparation:
FIG. A
•
Ensure that the wall mounting plate is level and mark two hole locations with
a pencil. Choose the best two hole options, choosing either the small or large
openings.
•
Use your screwdriver to drive the provided white plastic anchors into the wall.
•
Drive the screws into the anchors leaving .25” (7.5mm) between the top of the
screw and the wall.
FIG. A
2. Attach the Mounting Arm to the ScentWave™:
FIG. B
•
Attach the mounting plate to the bottom of the ScentWave™ using the provided
plate screws and pilot holes.
.25” (7.5mm)
3. Attach the assembly to the wall:
FIG. C
•
Line up the slots in the mounting plate with the screws in the wall and slide into
place.
•
Adjust the wall screws as necessary for a tight fit.
FIG. B
4. Power the ScentWave™
•
Plug the power cord into both the wall outlet and ScentWave™.
•
Extra power cord can should be secured out of sight.
FIG. C
