background image

10

myScatterBox.com

Menu System

The MOD200 should be ready to use straight out of the box. You should only need to 

amend the below settings when cascading multiple MOD200s, when channel band 60 

clashes with channels used in the local area or if you wish to change the channel name. 

Service Name

Default - AlienDVR.

 This is the channel name as it will appear in the program guide on the TV. 

If the MOD200 isn’t being used to connect an AlienDVR but some other equipment such as Sky 

box you can change the service name to suit.

Provider Name

Default - AlienDVR.

 This is the name of the channel provider e.g. BBC, BSkyB. This could be 

changed to the company installing or supplying the equipment or even a contact telephone 

number for the installer.

LCN (Logical Channel Number)

Default - 800.

 This will be the channel number on the TV. If you are using more than one MOD200 

as shown on page 6 then each additional unit will need a different LCN e.g. 801, 802 etc.

Frequency

Default - CH60 786.00 MHz.

 This may clash with TV channels in the local area. If you are using 

more than one MOD200 as shown on page 6 then each additional unit will need a different 

channel e.g. CH61, CH62 etc. (depending on channel used in the local area)

RF Level Adj.

Default - -30Db.

 This normally works okay when you are inputting a strong HDMI signal. 

However if longer runs are involved you may need to reduce this setting.

Password

Default - 0000.

 When accessing the menu system you will be asked to input your password. 

0000 is displayed by default so if you haven’t changed the default password you can simply 

press the ‘

OK

’ button. If you have previously set a password simply use the arrow buttons to 

select and change digits then press the ‘

OK

’ button.

Summary of Contents for MOD200

















Reviews: