Scarlett Top Style SC-HD70I80, Instruction Manual, Page: 4 / 19

IM020
www.scarlett.ru SC-HD70I80 4
GB INSTRUCTION MANUAL
IMPORTANT SAFEGUARDS

Please read this instruction manual carefully before use.

Before switching on the appliance for the first time please check if the technical specifications indicated
on the unit correspond to the mains parameters.

For home use only. Do not use for industrial purposes. Do not use the appliance for any other purposes
than described in this instruction manual.

Do not use outdoors.

Always unplug the appliance from the power supply before cleaning and when not in use.

If the appliance is used in a bathroom, it should always be unplugged after use, because nearness of
water is dangerous even if the appliance is switched off.

To prevent risk of electric shock and fire, do not immerse the appliance in water or any other liquids. If it
has happened DO NOT TOUCH the appliance, unplug it immediately and check in a service center.

For additional protection, the installation of a residual current device (RCD) having a rated residual
operating current not exceeding 30 mA is advisable in the electrical circuit supplying the bathroom. Ask
your installer for advice.

Do not spray aerosol products when the hair dryer is in operation.

The appliance is not intended for use for physically, sensory or mental disabled person (including
children) or for person with lack of life experience or knowledge, if only they are under supervision or
have been instructed about the use of the unit by responsible person.

Children must be under control in order not to be allowed to play with the appliance.

In case of power cord is damaged, its replacement should be done by the manufacture or service
department or the other high-skill person to avoid any danger.

Do not leave the appliance switched on when you do not use it.

Do not use other attachments than those supplied.

Never carry or suspend the appliance by the cord.

Do not attempt to repair, adjust or replace parts in the appliance. Repair the malfunctioning appliance in
the nearest service center.

Keep the cord away from sharp edges and hot surfaces.

If the product has been exposed to temperatures below 0ºC for some time it should be kept at room
temperature for at least 2 hours before turning it on.

IMPORTANT:

Keep your hair away from the immediate vicinity of the air inlet opening. Keep the air inlet filter dust and
fluff free.

Do not cover air inlet or air outlet otherwise the hair dryer may overheat.

The attachments become hot during operation.

The manufacturer reserves the right to introduce minor changes into the product design without prior
notice, unless such changes influence significantly the product safety, performance, and functions.

ATTENTION! Do not use the device beside the bathrooms, swimming pools and other vessels
containing water.

Manufacturing date is indicated on the unit and/or on packing as well as in accompanying documents in
the following format XX.XXXX where first two figures XX is the month of production, and following four
figures XXXX is the year of production.
INSTRUCTION FOR USE

Fully unwind the cord.

Attach a nozzle.

Insert the plug into the power supply.

Select the desired speed (heating mode) using the II speeds (3 heat settings) switch.
SPEED CONTROL
0
– off;
– medium speed for delicate drying and styling;
– high speed for quick drying and styling.
HEAT SETTINGS
– cold airflow;
– medium temperature for gentle drying and shaping;
– high temperature for rapid drying.
IMPORTANT: Airflow speed will be increased automatically after increasing the airflow temperature.
CONCENTRATOR

The air concentrator is for bundling and directing the airflow for selective drying.