IM015
www.scarlett.ru
SC-SF111RC07
8
Place rear grille on the motor shaft
.
Tighten nut of the rear grille on the shaft.
Place blades on shaft so that they touch the fixing mechanism.
To secure them tighten the blades cap counterclockwise.
Put front grille and rear grille so that the logo in the middle of the front cover takes the horizontal position and fasten them
with the hoop
.
Adjust the fan tilt angle adjustment screw.
The fan is ready for operation
OPERATION
CAUTION: To avoid electroconvulsive shock or fire danger, do not operate fan under the conditions of high humidity.
BUTTONS:
On/ Speed- button switches the fan on and switches between different speeds: 3
– high speed; 2 – medium speed; 1 –
minimum speed.
Timer- button helps to adjust fan operating time up to maximum time of 9. Each press of this button adds 1 hour to fan operating
time.
Swing- button sets oscillating mode.
Off- button switches the fan off.
LIGHT INDICATORS:
Time,h - fan operating time set
Speed
-rotation of blades;
3 - high speed;
2 - middle speed;
1 - minimum speed;
Swing - oscillating mode
Normal - air stream at constant rate
Nature - air stream by intense waves
Seep - air stream by weak waves
REMOTE CONTROLLER:
Control and mode settings can be made manually by using switch mode buttons on control box or by using remote controller:
Off- button switches the fan off
Swing - oscillating mode
Timer- button helps to adjust fan operating time. Each pressing of this button adds 1 hour of fan operating time.
Mode- button helps to choose operating mode of fan.
Normal - air stream at constant rate
Nature - air stream by intense waves
Sleep - air stream by weak waves
On / Speed -buttons switches the fan on and shifts between different fan operating modes.
NOTE: Remote controller operates on 2 AAA batteries which are not included.
MAINTENANCE
Before cleaning unplug fan first.
Do not use abrasive cleansers.
Clean front and rear grilles, blades, stand tube and stand base with soft moistened cloth and wipe dry.
STORAGE
Keep the device in normal conditions in dry place.
The symbol on the unit, packing materials and/or documentations means that used electrical and electronic units and
batteries should not be thrown out with ordinary household garbage. These units should be passed to special receiving point.
For additional information about actual system of the garbage collection address to the local authority.
Proper utilization will help to save valuable resources and avoid negative influence on the public health and environment which
may be caused as a result of improper handling of garbage.
