Scarlett SC-SF111B04, Instruction Manual

Page: 6 / 6

IM015
www.scarlett.ru SC-SF111B04 6
электрондық бұйымдар мен батарейкалар кәдімгі
тұрмыстық қалдықтармен бірге шығарылмауы керек
дегенді
білдіреді. Оларды арнайы қабылдау
бөлімшелеріне өткізу қажет.
Қалдықтарды жинау жүйелері туралы қосымша
мәліметтер алу үшін жергілікті басқару органдарына
хабарласыңыз.
Қалдықтарды
дұрыс кәдеге жарату бағалы
ресурстарды сақтауға және қалдықтарды дұрыс
шығармау салдарынан адамның денсаулығына және
қоршаған ортаға келетін теріс әсерлердің алдын алуға
көмектеседі.
GB INSTRUCTION MANUAL
IMPORTANT SAFEGUARDS

Please read these operating instructions carefully before
connecting your kettle to the power supply, in order to
avoid damage due to incorrect use.

Before switching on the appliance for the first time please
check if the technical specifications indicated on the unit
correspond to the mains parameters.

Incorrect operation and improper handling can lead to
malfunction of the appliance and injuries to the user.

For home use only. Do not use for industrial purposes.

Always unplug the appliance from the power supply when
not in use.

Do not immerse the unit, cord or plug in water or other
liquids. If it has happened, remove the plug from the wall
socket immediately and have the unit checked by an
expert before using it again.

Do not operate the appliance if the cord or the plug is
damaged or if the appliance has been otherwise
damaged. In such cases take the appliance to a qualified
specialist for check and repair if necessary.

Ensure that the cord does not hang over sharp edges and
keep it away from hot surfaces.

To disconnect the appliance from the power supply pull it
out by the plug only, not by the cord.

Place the appliance on a dry stable surface, away from
sources of heat (e.g. hotplates); do not place it under
curtains and shelves.

Do not leave the appliance unattended when in use.

This appliance is not intended for use by persons
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction
concerning use of the appliances by a person responsible
for their safety.

Children should be supervised to ensure that they do not
play with the appliance.

Avoid contact with moving parts of the appliance. Do not
put pencils or other things through the front mesh / grille of
the working fan.

Do not switch on the fan without well-adjusted front and
rear grilles.Do not attempt to repair, adjust or replace parts
in the appliance. Repair the malfunctioning appliance in
the nearest service center.

Do not attempt to repair, adjust or replace parts in
the appliance. Repair the malfunctioning appliance
in the nearest service center.

If the product has been exposed to temperatures below
0ºC for some time it should be kept at room temperature
for at least 2 hours before turning it on

The manufacturer reserves the right to introduce minor
changes into the product design without prior notice,
unless such changes influence significantly the product
safety, performance, and functions.

Production date mentioned on the unit and/or on the
packing materials and documentations.
ASSEMBLING INSTRUCTIONS:

Fan is packed disassembled. Before assembling make
sure that all the required parts are undamaged and
included into the set.

Do not plug in the device before its assembling is
finished.

Tighten stand tube to stand base with screw. Fix base
cover to stand base with a screw (supplied with a set).

Unscrew out-joint, put the stand cover and base cover on
the stand base, pull the extension pole out then tighten
the out-joint again.

Place control box firmly on top of extension pole, tighten
screw B.

Unscrew the blade cap by turning clockwise and rear grill
nut by turning counter clockwise and put both blade cap
and rear grill nut off the motor shaft.

Put rear grille on motor shaft.

Secure it with rear grille nut.

Slide blades on motor shaft so that claws on motor shaft
match the blades slots.

Screw blade cap on shaft by turning counter clockwise.

Put front grille on rear grille and close clips or screw grille
ring to secure grilles together.

Adjust the fan vertically by vertical adjustment screw.

The fan is ready for work.
OPERATION MANUAL
CAUTION: To avoid electroconvulsive shock or fire danger,
do not operate fan under the conditions of increased
humidity.

Place fan only onto dry flat unyielding surface.
-
“1” For minimum operational speed;
-
“2” For medium operational speed;
-
“3” For maximum operational speed;
-
“0” The fan is switched off;
-
“ ” Night light mode.

On the upper part of the motor cover there is oscillating
knob. If pressed, it makes the fan cabinet with blades
traverse from side to side. To cancel oscillating mode
push oscillating knob upward.

To switch the fan off push the button “0”
MAINTENANCE

Before cleaning unplug fan first.

Clean front and rear grilles, blades, stand tube and stand
base with soft moistened cloth and wipe dry.

Do not use abrasive cleansers
STORAGE

Keep the device in normal conditions in dry place.
The symbol on the unit, packing materials and/or
documentations means used electrical and electronic units
and battery’s should not be toss in the garbage with
ordinary household garbage. These units should be pass
to special receiving point.
For additional information about actual system of the
garbage collection address to the local authority.
Valid utilization will help to save valuable resources and
avoid negative work on the public health and environment
which happens with incorrect using garbage.