Scarlett SC-MG45M24, Instruction Manual

Page: 6 / 40

IM022
www.scarlett.ru SC-MG45M24 6

Do not use other attachments than those supplied.

In case of power cord is damaged, its replacement should be
done by the manufacture or service department or the other
high-skill person to avoid any danger.

Do not attempt to repair, adjust or replace parts in the appliance.
Check and repair the malfunctioning appliance in the nearest
service center only.

Keep the cord away from sharp edges and hot surfaces.

Do not pull, twist, or wrap the power cord around the appliance.

Do not place the appliance near gas or electric oven or store at
heated surface.

Avoid contacting with moving parts.

The blades are very sharp, so handle them with care.

Do not push products into the appliance with fingers while it is in
operation. If food becomes lodged in the feeder tube, use the
push
er to push it down. If this doesn’t work, turn the motor off,
unplug the unit, and then disassemble the appliance to remove
remaining food.

When carrying the unit be sure to hold the motor housing with
both hands. Do not carry the unit by the hopper plate or head.

Do not fix the cutting blade and cutting plate when using kebbe
attachment.

Do not grind hard food such as bones, nuts, ginger or other
products with hard fiber.

When the circuit breaker activates, do not switch on.

Do not run the meat grinder continuously for longer than 7
minutes
. Turn the unit off and let it rest for at least 7 minutes to
cool down the motor, otherwise the motor may be damaged.

Be sure to turn the appliance off after each use. Make sure the
motor stops completely before disassembling.

Do not overload the appliance with products.

If the product has been exposed to temperatures below 0ºC for some time it should be kept at
room temperature for at least 2 hours before turning it on.

The manufacturer reserves the right to introduce minor changes into the product design without
prior notice, unless such changes influence significantly the product safety, performance, and
functions.

Manufacturing date is indicated on the unit and/or on packing as well as in accompanying
documents in the following format XX.XXXX where first two figures XX is the month of
production, and following four figures XXXX is the year of production.
BEFORE THE FIRST USE

Wash all parts (except body) in warm soapy water.

Before plugging in, ensure the appliance is switched off.