IM020
SC-EK18P58
3
GB
INSTRUCTION MANUAL
IMPORTANT SAFEGUARDS
Please read these operating instructions carefully
before connecting your kettle to the power supply,
in order to avoid damage due to incorrect use.
Before switching on the appliance for the first time
please check if the technical specifications
indicated on the unit correspond to the mains
parameters.
Incorrect operation and improper handling can lead
to malfunction of the appliance and injuries to the
user.
The appliance is intended for use only in domestic
aims. The unit is not intended for industrial and
commercial use, and also for use in:
kitchen area for the stuff of shops, offices and the
other industrial places
farm houses
hotels, motels, rest homes and other similar
places by residents.
Do not use outdoors or in damp area.
Always unplug the appliance from the power supply
when not in use.
Keep the base unit away from water and protect
from splashes.
Do not immerse the unit, cord or plug in water or
other liquids. If it has happened, remove the plug
from the wall socket immediately and have the unit
checked by an expert before using it again.
In case of power cord is damaged, its replacement
should be done by the manufacture or service
department or the other high-skill person to avoid
any danger.
Ensure that the cord does not hang over sharp
edges and keep it away from hot surfaces.
To disconnect the appliance from the power supply
pull it out by the plug only, not by the cord.
Place the appliance on a dry stable surface, away
from sources of heat (e.g. hotplates); do not place
it under curtains and shelves.
Do not leave the appliance unattended when in
use.
The appliance is not intended for use for
physically, sensory or mental disabled person
(including children) or for person with lack of life
experience or knowledge, if only they are under
supervision or have been instructed about the use
of the unit by responsible person.
Children must be under control in order not to be
allowed to play with the appliance.
Use the kettle only with the base unit supplied, and
do not use the base unit for any other purposes.
Never take the kettle from its base while in
operation. Switch the appliance off first.
Electric kettle with button in turn-on position is
forbidden to put on the base.
ATTENTION: Do not open the lid while water is
boiling.
ATTENTION: During the operation, the appliance
heats up. Be careful! Do not touch the body of the
unit while it is working. To avoid skin burns with hot
steam, do not bend over the unit during opening
the lid.Close the lid properly before switching on.
Otherwise, the appliance will not switch off
automatically and the hot water may overflow.
The kettle is for heating water only, not for any
other purposes and liquids.
Do not attempt to repair, adjust or replace parts in
the appliance. Repair the malfunctioning appliance
in the nearest service center.
If the product has been exposed to temperatures
below 0ºC for some time it should be kept at room
temperature for at least 2 hours before turning it on
The manufacturer reserves the right to introduce
minor changes into the product design without prior
notice, unless such changes influence significantly
the product safety, performance, and functions.
Manufacturing date is indicated on the unit and/or
on packing as well as in accompanying documents
in the following format XX.XXXX where first two
figures XX is the month of production, and following
four figures XXXX is the year of production.
BEFORE USING FOR THE FIRST TIME
Kettle is suitable for boiling water.
To remove the foreign smell from the new unit
before the first use boil the water with added juice
of 1-3 lemons or a pack of citric acid.
Leave the fluid in the unit for 12 hours, then boil
again.
Pour the solution out and rinse the kettle inside
carefully avoiding fall water on the electric contacts.
Repeat the procedure if necessary.
INSTRUCTION FOR USE
FILLING
Remove the kettle from the base unit.
You can fill the kettle with water via the spout or
neck with opened lid.
Do not fill the kettle with less than 0.3 l of water
(less than “MIN” mark) to prevent it from operating
dry and more than 1.7 l (up to “MAX” mark) to
avoid overfilling and water spilling out during the
boiling.
SWITCHING ON
After filling with water, place the kettle on the base
unit.
Connect the plug to the power supply and push
On/Off switch. The appliance will turn on and
indicator will light.
SWITCHING OFF
When water begins to boil, the kettle will switch off
automatically and indicator light will go off.
NOTE:
This appliance has a safety system, which
automatically switches heating element off if the
appliance inadvertently has been switched on
when empty, or if it operates dry. In this case let
the appliance cool down 10 minutes before filling
with water again.
SWITCHING ON AGAIN
If the kettle has been switched off automatically, it
can be switched on again after cooling for 15-20
seconds.
CARE AND CLEANING
Open the lid and pour out the water through the
orifice.
