Scarlett comfort SC-SF111T01, Instruction Manual

Page: 8 / 8

IM019
www.scarlett.ru SC-SF111T01 8

The manufacturer reserves the right to introduce minor changes into the product design without prior notice, unless
such changes influence significantly the product safety, performance, and functions.

Production date mentioned on the unit and/or on the packing materials and documentations.
ASSEMBLING INSTRUCTIONS:

The device is intended for air circulation in the room.

Fan is packed disassembled. Before assembling make sure that all the required parts are undamaged and included
into the set.

Do not plug in the device before its assembling is finished.

Set up the stand tube to stand base.

Fix the motor and control box on the extension pole with the screw B.

Unscrew fixing screw of the rear grille and take it off the motor shaft.

Place rear grille on the motor shaft.

Tighten nut of the rear grille on the shaft.

Place blades on shaft so that they touch the fixing mechanism.

To secure them tighten the blades cap counterclockwise.

Put front grille and rear grille so that the logo in the middle of the front cover takes the horizontal position and fasten
them with the hoop. The fan is ready for operation

Adjust the fan tilt angle adjustment screw.

The fan is ready for operation.
OPERATION MANUAL
CAUTION: To avoid electroconvulsive shock or fire danger, do not operate fan under the conditions of increased
humidity.

Place fan only onto dry flat unyielding surface.

Turn the timer to the «ON» position and select the speed. The fan has three speed modes:
–
"1" - the minimum fan speed;
–
"2" - the average speed of rotation;
–
"3" - the maximum speed of rotation;
–
"0" - the fan is off.

On the upper part of the motor cover there is oscillating knob. If pressed, it makes the fan cabinet with blades
traverse from side to side. To cancel oscillating mode push oscillating knob upward.

Set the time.
TIMER
ATTENTION! The timer work only when you press one of the speed modes (1-3).

The timer is used to set the time of working of fan. The maximum working time is 1 hours.

To activate the timer, set the speed from 1 to 3.

To set the time, set the knob opposite the mark on the scale required timer.

To switch
the fan off push the button “O”
MAINTENANCE

Before cleaning unplug fan first.

Clean front and rear grilles, blades, stand tube and stand base with soft moistened cloth and wipe dry.

Do not use abrasive cleansers
STORAGE

Keep the device in normal conditions in dry place.
The symbol on the unit, packing materials and/or documentations means used electrical and electronic units
and battery’s should not be toss in the garbage with ordinary household garbage. These units should be pass to
special receiving point.
For additional information about actual system of the garbage collection address to the local authority.
Valid utilization will help to save valuable resources and avoid negative work on the public health and environment
which happens with incorrect using garbage.