Scarlett Comfort SC-SF111B24, Instruction Manual

Page: 8 / 8

IM021
www.scarlett.ru SC-SF111B24 8

If the product has been exposed to temperatures
below 0ºC for some time it should be kept at
room temperature for at least 2 hours before
turning it on.

The manufacturer reserves the right to introduce
minor changes into the product design without
prior notice, unless such changes influence
significantly the product safety, performance, and
functions.

Manufacturing date is indicated on the unit and/or
on packing as well as in accompanying
documents in the following format XX.XXXX
where first two figures XX is the month of
production, and following four figures XXXX is
the year of production.
ASSEMBLING INSTRUCTIONS:

The device is intended for air circulation in the
room.

Fan is packed disassembled. Before assembling
make sure that all the required parts are
undamaged and included into the set.

Do not plug in the device before its assembling is
finished.

Tighten stand tube to stand base with screw. Fix
base cover to stand base with a screw (supplied
with a set).

Unscrew out-joint, put the stand cover and base
cover on the stand base, pull the extension pole
out then tighten the out-joint again.

Place control box firmly on top of extension pole,
tighten screw B.

Unscrew the blade cap by turning clockwise and
rear grill nut by turning counter clockwise and put
both blade cap and rear grill nut off the motor
shaft.

Put rear grille on motor shaft.

Secure it with rear grille nut.

Slide blades on motor shaft so that claws on
motor shaft match the blades slots.

Screw blade cap on shaft by turning counter
clockwise.

Put front grille on rear grille and close clips or
screw grille ring to secure grilles together.

Adjust the fan vertically by vertical adjustment
screw.

The fan is ready for work.
OPERATION MANUAL

CAUTION: To avoid electroconvulsive shock or
fire danger, do not operate fan under the
conditions of increased humidity.

Place fan only onto dry flat unyielding surface.

The fan can work in three speed modes:
-
“1” For minimum operational speed;
-
“2” For medium operational speed;
-
“3” For maximum operational speed;
-
“0” The fan is switched off;
-
“L” Night light mode.

On the upper part of the motor cover there is
oscillating knob. If pressed, it makes the fan
cabinet with blades traverse from side to side.
To cancel oscillating mode push oscillating knob
upward.

To
switch the fan off push the button “0”.
TIMER
ATTENTION! The timer work only when you press
one of the speed modes (1-3).

The timer is used to set the time of working of
fan. The maximum working time is1 hours.

To activate the timer, set the switch to
«ON».

To set the time, set the knob opposite the mark
on the scale required timer.

To switch the fan off push the button “OFF”
MAINTENANCE

Before cleaning unplug fan first.

Clean front and rear grilles, blades, stand tube
and stand base with soft moistened cloth and
wipe dry.

Do not use abrasive cleansers
STORAGE

Keep the device in normal conditions in dry
place.

The symbol on the unit, packing materials
and/or documentations means used electrical
and electronic units should not be toss in the
garbage with ordinary household garbage. These
units should be pass to special receiving point.

For additional information about actual system of
the garbage collection address to the local
authority.

Valid utilization will help to save valuable
resources and avoid negative work on the public
health and environment which happens with
incorrect using garbage.