Scarlett comfort SC-173, Instruction Manual

Page: 7 / 7

IM015
www.scarlett.ru SC-173
7

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction
concerning use of the appliances by a person responsible for their safety.

Children should be supervised to ensure that they do not play with the appliance.

Avoid contact with moving parts of the appliance. Do not put pencils or other things through the front mesh / grille of
the working fan.

Do not switch on the fan without well-adjusted front and rear grilles.Do not attempt to repair, adjust or replace parts
in the appliance. Repair the malfunctioning appliance in the nearest service center.

If the product has been exposed to temperatures below 0ºC for some time it should be kept at room temperature for
at least 2 hours before turning it on

The manufacturer reserves the right to introduce minor changes into the product design without prior notice, unless
such changes influence significantly the product safety, performance, and functions.

Production date mentioned on the unit and/or on the packing materials and documentations.
ASSEMBLING INSTRUCTIONS:

Fan is packed disassembled. Before assembling make sure that all the required parts are undamaged and included
into the set.

Do not plug in the device before its assembling is finished.

Fix fan control box to the base or to the clip and tighten with a screw.

With the help of a clip fix the fan onto the base or any other appropriate surface.

The device is ready for operation
CAUTION:

Do not plug in the device before its assembling is finished.

Do not operate the appliance with damaged blades.
OPERATION
FAN OPERATING MODES

To switch the fan on put the mode switch to 1 or 2 position:
-1 -means low speed of fan
-2- means high speed of fan

To switch the fan off put the mode switch to 0 position

Air flow direction can be changed by adjusting fan control box in a higher or lower position by a vertical adjustment
screw.

On the upper part of the motor cover there is oscillating knob. If pressed, it makes the fan cabinet with blades
traverse from side to side with the angle 90o. To cancel oscillating mode push oscillating knob upward.
VERTICAL ADJUSTMENT

Air flow direction can be changed by adjusting fan control box in a higher or lower position by a vertical adjustment
screw.
MAINTENANCE

Before cleaning unplug fan first.

Clean the fan and blades with soft cloth moistened with soap solution.

Do not use abrasive cleansers, gasoline, solvents or other aggressive detergents.
STORAGE

Keep the device in dry cool place.

It is recommended to keep and to use for seasonal storage the original carton box of the appliance.

Do not use abrasive cleansers, gasoline, solvents or other aggressive detergents.
The symbol on the unit, packing materials and/or documentations means used electrical and electronic units
and battery’s should not be toss in the garbage with ordinary household garbage. These units should be pass to
special receiving point.
For additional information about actual system of the garbage collection address to the local authority.
Valid utilization will help to save valuable resources and avoid negative work on the public health and environment
which happens with incorrect using garbage.