Part No. SCAZ037886 8.6.00
27
E&OE
Merlin and Magnum Hydrostatic
Operating Instructions
Using the high pressure water system (option)
High pressure water can be hazardous, always wear goggles or suitable eye/face protection.
Exercise extreme care when using the lance, do not direct the jet at other people or electrical connections.
Failure to comply can result in serious injury.
The high pressure water is used on the following options:
• Front spray bar
q
.
• Suction tube boost spray bar
w
.
• Suction fan wash assist
*
e
.
• Hand lance and retractable hose
*
r
. See page 28.
To operate any of the above options the vehicle must be in hydrostatic drive,
with sweep mode ON
. Press the high pressure water switch
on the
auxiliary control panel and open the appropriate valve(s) for the function(s)
required.
Fan wash assist is only an aid to fan cleaning. It is recommended that this
option is used immediately following a days sweeping. The fan should
always be cleaned in accordance with the recommended operators
routine maintenance.
Due to the possibility of excess water and loose material being ejected
via the hopper hood when the suction fan is restarted, this procedure
should only be carried out at an appropriate location.
*
These options always fitted on the drivers side.
MERLIN
HYDROSTATIC
LIN
OSTATIC
1
2
3
Valves for the various options
