5
3 PUTTING INTO SERVICE
3.1 Machines Running Place
The needed place of the machine is given in Annex-2.
During installation, pay attention to local requirements and environmental factors of the
machine. The place where the machine is going to be located has to be safe and hard.
For safety working before using the machine has to be controlled if it is exactly located or
not. There has to be enough and safety place for making period maintenance.
3.2 The Machine Calibration According to Environmental Conditions
Pay at
tention to environmental conditions. Don’t let the machine in moistly areas. There
has to be 500mm distance between the movable parts of the machine and the fixed parts
or the stored materials.
3.3 Installation of the Machine
SCANTOOL TSX 1060 GUILLOTINE SHEAR
is delivered, ready for use. You can
calibrate the cutting arm stem with a “4 Allen” wrench.
4 WORKING CONDITIONS
4.1 Starting the Machine
You can use the machine after fixing it on hard ground.
During cutting, squeeze the working item with the press arm to block the moves. Move the
gauge hand wheel to right and left to calibrate the gauge distance. For preventing the
move of the gauge, lock up the clamping arm. Movable working items can cause
accidents. You can calibrate the weight for better cutting operation and the metal sheet
plate thickness which will be cut.
