4
1. Transport & Handling
1.1 Transport
SCAN 10 & 13
are delivered on a pallet with the following measures:
SCAN 10
120 x 80 x 145 cm
310 kgs
SCAN 13
170 x 80 x 145 cm
340 kgs
The bending machine is packed in protective wrapping.
1.2 Handling
The machine can be transported on the pallet without difficulty.
1.3 Placing
Mounting of
10 & 13
, must take place on a firm and level ground. The machine must be
fastened to the ground by means of the four fittings which are used to fasten the
bending machine to the pallet. Both holes in the triangle sheet of the mounting piece
are applied. (see
fig. 1.1
).
It is important that this machine is bolted to the floor.
Before the machine is bolted to the floor the machine it is necessary to level out
the machine. It can be necessary to make adjustment with distance pieces
underneath the machine if the floor is not in level. The adjustment is necessary to
avoid the machine for twisting and then pull uneven.
Fig.: 1.1 The machine is bolted to the floor.
