Scantool MB-35, Operator'S Manual

Page: 29 / 41

MODEL MB-35
MODEL MB-35
29
9. Use Safety Glasses
•
Also use face or dust mask if cutting operation is dusty.
10. Do Not Abuse Electrical Cord
•
Never carry tool by cord or yank it to disconnect from receptacle.
•
Keep cord from heat, oil and sharp edges.
11. Secure Work
•
Use clamps or a vise to hold work. lt's safer than using your hand and it
frees both hands to operate tool.
12. Do Not Overreach
•
Keep proper footing and balance at all times.
Important safety instructions
1. Maintain Tools With Care
•
Keep tools sharp and clean for batter and safer performance.
•
Follow instructions for lubricating and changing accessories.
•
lnspect tool cords periodically and if damaged, have repaired by
authorized service facility.
•
lnspect extension cords periodically and replace if damaged.
•
Keep handles dry, clean, and free from oil and grease.
2. Disconnect Tools
•
Unplug when not in use, before servicing, and when changing
accessories, such as blades, bits and cutters.
3. Remove Adjusting Keys And Wrenches
•
Form habit of checking to see that keys and adjusting wrenches are
removed from tool before turning it on.
4. Avoid Unintentional Starting
•
Do not carry a plugged-in tool. Disconnect from power source before
moving.
•
Be sure switches are off before connecting to a power source.
5. Outdoor Use Extension Cords
•
When tool is used outdoors, use only extension cords intended for use
outdoors and so marked.