Scansonic IN210, User Manual

Page: 10 / 192

10
b. Turn SELECT/SNOOZE knob to cycle through the alphanumeric character list, press
SELECT/SNOOZE knob to select an appointed character.
Note: WEP/WPA pass codes are case-sensitive.
c. If a wrong character is being input while entering your password, select to delete
that character.
Note:
= Backspace; means return to previous track; radio will
automatically save the WEP/WPA you've input, so no bother to re-enter these codes.
d. After selecting the final character of your password, turn SELECT/SNOOZE knob to
, and then press SELECT/SNOOZE knob to confirm. The radio is connected to
wireless network.
Note: If a password (WEP/WPA) isn't required by your network, radio will connect to
the network automatically.
4. Setup wizard completed, press
SELECT/SNOOZE
knob again to exit.