SCANMASKIN SC-330 RS, Manual

Page: 34 / 60

Scan Combiflex 330 – Manual
- - 34
1 Specifications
The SC-330 is available with different power inputs. This is described in the different sections later
on in this chapter.
1.1 Electrical specifications
To find the specifications that apply to your machine, check the information plate on the machine.
Never connect the SC-330 to any other voltage or number of phases than described in this
specification.
The power source must be fused according to “External fuse” in this specification; also the
cables used must be marked and rated in accordance with the fuse used. Failure to comply
with the correct fuses may cause fire or injuries.
Machine SC-330 Standard SC-330 RS SC-330 3~ SC-330 120V
Power choice
1
230 V 1~
2
230 V 1~ 400 V 3~ 120 V 1~
Power
1.5kW (2 hk) 1.5 kW (2 hk) 4 kW (5.5hp) 1.5 kW (2 hp)
Current
10 A 10 A 16 / 32 Amp 18.5 A
Voltage 200 – 240 V 1~ 200 – 240 V 1~ 400 V 3~ 100 – 130 V 1~
Frequency 50 Hz +/- 5% 50/60 Hz 50/60 Hz 60 Hz +/- 5%
External fuse
3
10 A 13 A 16 A 20 A
Power inlet
4
CEE 7/7 – 250V
16A + PE
CEE 7/7 – 250V
16A + PE
415 V
3P+N+PE
NEMA 5-20 – 125V
20A + PE
Table 1-1 Electrical specifications
All models are CE-marked.
If using a generator see “2.6.2 Using a generator”
1
This refers to different power choices. Note that a SC-330 made for one choice of power must be used with the particular
choice.
2
Standard
3
Maximum current for the fuses used in the power source (i.e. the distribution box) .
4
This is the standard inlet used. Machines sold outside of EU will be shipped either with a local standard inlet or an adapter.
34
www.scanmaskin.com