Multistripper mini – Manual
- 9 -
Switch off and disconnect the machine for maintenance and repair
.
Never use the machine with a defective cable; this can lead to an electric shock. Do not pull
the machine at the cable. Use only intact plugs and cables.
It can come for injuries or deaths by electric shock if the cable is damaged. Hold the cable far
from the lower part of the machine, so that it cannot get into contact with the blade. Lead the
cable always to the back away.
Should the machine not be properly connected to the electric system, this can lead to deaths
byelectric shock. For a maximum protection against electric blows you use please an electric
system with safety switch.
Suggested maximum cable length 7 m, for longer cables use a bigger cross section. With the use of
the machine with cable of insufficient cross section and/or excessive length, this can lead to material
damages or personal damages.
Please use only admitted cables with two leaders.
2.7.2 Safety notes noise
The noise that is created during the operation of the machine depends on many factors. All the
possible application types and the local regulations, such as the size of the rooms and the
features of the ground affect the development of the noise.
Therefore the local operator has to assess the effect and order the precautionary wearing of ear
protections.
2.7.3 Sound level and vibration
Sound pressure* 95 dB(A)
Sound power*
108 dB(A)
Vibration
16,3 m/s²
*
Sound level according to CEN/TC 255 N
2.7.4 Safety notes operation
Keep hands, feet and not sticking parts of the clothes far from the machine parts located in
work. The parts in movement of this machine can cause heavy injuries and/or damages.
