20
Radio settings
See the chapter ”Radio”, subchapter ”Radio Data System (RDS)”, section ”Activating
or deactivating RDS regional mode”.
Truck attributes
See the chapter ”Navigation”, subchapter ”Vehicle specifics”, section ”Activating or
deactivating RDS regional mode”.
Volume settings
The volume of the voice commands can be changed during a guidance message
using the multi-function button (13) or via the
NAVIGATION SETUP
menu.
The setting is saved by the system and is used automatically for all future voice
commands until the setting is changed again.
Audio settings:
With the touch screen:
To open the
AUDIO SETUP
menu press the
SETUP (9)
button and select
Audio
.
Tap on one of the screen buttons (
/
,
/
,
/
) in order to adjust the
audio settings.
Note
Alternatively you can use the multi-function button (11) if a main menu for
audio is activated.
You cannot select the
Audio
button in the
SETUP
menu if the volume on
the device is switched off.
Bass
: Use this setting to adjust the low frequencies in the sound source.
Treble
: Use this setting to adjust the high frequencies in the sound source.
