Scania Higer A30 Page 32 User Manual Download

Page: 32 / 91

Driver’s seat

Pull lever and move the seat cushion forward/backward.

(4)Horizontal suspension

Lever to the right: Horizontal adjustment released.

Lever to the left: Horizontal adjustment locked.

(5)Lowering

Press switch down: seat lowers.

Press switch up: seat moves to the adjusted height set.

(6)Damper adjustment

By adjusting the damper, the suspension characteristics of the seat

can be optimally adapted to every roadway and every driver.

Lever up: minimum damper force.

Lever down: maximum damper force.

(7)Height adjustment

Pull or push lever and adjust the seat in desired height.

(8)Integrated pneumatic system (IPS)

Press button to vent and bleed the corresponding air chamber. This

enables an optimal adoption of the backrest to your body’s shape.

(9)Heating (option)

Thermostatic regulated heating for seat cushion and backrest. To be

switched on or off by switch.

(10)Backrest adjustment

Summary of Contents for Higer A30




























































































Search results

Summary of Contents for Higer A30

Reviews:

Related manuals for Higer A30

Brands by name

Popular brands

Scania Higer A30, User Manual

Search results

Summary of Contents for Higer A30

Reviews:

Related manuals for Higer A30

Brands by name

Popular brands