1
User Manual
IP09P
Introduction
IP09P is a point-to-point PoE (Power over Ethernet) extender that can use single CAT5e (or greater) cable
to extend TCP/IP signal and huge amount of power for a remote PoE device, such as speed dome
camera, Dante PoE speaker, smart LED…etc., with no external power required. It’s a perfect solution for
CCTV system, large-scale audio environment, smart building and factory.
Features
Signal extension up to 800M over CAT5e cable.
Provides up to 90W power for remote PoE device.
Power source from either a PoE switch or an external power adapter.
Bandwidth up to 100Mbps.
Supports Full duplex and half duplex mode and Auto MDI/MDI-X switching.
Built-in 30kV ESD, 40A EFT, and 30A surge at RJ45 side.
Installation view
1
Power from a PoE switch
2
Power from a power adapter
