3
Recommend cable
：
1.
Link cable recommend use high quality Cat.5e
、
Cat.6
、
Cat.6a cable and RJ45 connector.
2.
Poor quality cable or network RJ45 connection or improper construction will cause unstable
link connection.
3.
Recommend to use high quality power cable for DC power output to make sure good quality
power connection.
LED Indciation
：
IP06I90
Green: Power on/off
Blue: PoE link
Red: Abnormal status
※
LED Indication Status Chart:
Item/Color
Green
Blue
Red
Instruction
Power normal
On
Power input normal
PoE Link
On
PoE Equipment link normal
PoE Abnormal
Flash
Non- PoE equipment, or PoE link abnormal
Output over load
On
PoE overload warning
Overload
Protection
Flash
PoE overload protection
Overheat
Protection
Flash
Flash
System overheat
Voltage too low
Flash
Flash
Input voltage too low
System
Damaged
Flash
Flash
Flash
System damaged
※
If Overload over 3 seconds, the overload protection will be activated and turn off POE power.
After 10 seconds, the POE power supply will be auto restart,
※
Under overheating mode, the POE power will be auto turn off, after 30 seconds the POE
power supply will be auto restart.
IP06S60 LED Indication:
Green: Power on/off
RJ-45 Connector
：
IP06I90 Interface
ETHERNET: use CAT5e/6 to connect PC or Switch devices
PoE : use CAT5e/6 cable to provide IP06S60 power with max distance 100M
IP06S60 Interface
ETHERNET: use CAT5e/6 cable to connect IP Camera/Network devices
PoE : use CAT5e/6 work with IP06I90 to receive power with max distance 100M
DC JACK Connector :
IP06I90 DC JACK: External Power Supply input DC48V ~ 56V (90W Max)
.