6.0 RS232 Computer Local Control Function
：（
CONSOLE
）
6.1 Connect the RS232 CONSOLE port to the COM port of the host by an F/M RS232 straight
cable (pin 2 to pin 2; pin 3 to pin 3, pin 5 to pin 5).
The Matrix communication format is 9600, 8, N, 1 (9600 bps, 8 data bits, no parity check, 1 stop bit)
6.2 Operation Instruction format:
C Space + par Enter
The Matrix will reply OK once string is correct, NG in case of incorrect string
TX[x] SP [y]
is the string to switch on output x the input y
PWR SP [z]
is the string to put the matrix in Standby and On status
[SYMBOL]
[PARAMETER]
--------------- ------------------------------------------------------
x
1 | 2 | 3 | 4
Output 1 to 4
y
01 | 02 | 03 | 04 | 00
Input 1 to 4, 00: Off
z
00 | 01
00: Standby, 01: On
Example:
-To route input 4 to output 1, send the following string:
Command Input
TX1
SP
04
Enter
-To route input 2 to output 3, send the following string:
Command Input
TX3
SP
02
Enter
-To put in standby the matrix, send the following string:
Command
PWR SP
00
Enter
Command are case insensitive. Be sure that your terminal after Enter (0D Hex) character
doesn’t send LF (0A). In this case, command will not be executed.
