41
Levelling the washer dryer
！
Warning!
• The lock nuts on all four feet must be screwed tightly against the housing.
1.
Check if the legs are closely attached to the cabinet. If not, please turn them to
their original positions tighten the nuts.
2.Loosen the lock nut turn the feet until it closely contacts with the floor.
3.Adjust the legs and lock them with a spanner, make sure the machine is steady.
1
2
3
4
Raise
Lower
Connect Water Supply Hose
！
Warning!
Lock nut
foot
• To prevent leakage or water damage, follow the instructions in this chapter!
• Do not kink, crush, modify or sever water inlet hose.
• For the model equips hot valve,connect it to hot water tap with hot water supply
hose. Energy consumption will decrease automatically for some program.
Connect the inlet pipe as indicated, There are two ways to connect the inlet pipe.
1.Connection between ordinary tap and inlet hose.
1
2
slide bushing
3
4
clamp nut
Loosen clamp nut and
four bolts
Tighten clamp nut
Press slide bushing,
insert inlet hose into
connecting base
Connection finished
2.Connection between screw tap and inlet hose.
slide bushing
Tap with threads and inlet hose
Special tap for washer dryer
