Productview
A LED light
B Shelves
C Drawers cover
D Freezer Drawers
E Leveling Feet
F Balconies
Space Requirement
• Select a location without direct expo-
sure to sunlight;
• Select a location with enough space for
the refrigerator doors to open easily;
• Select a location with level (or nearly
level) flooring;
• Allow sufficient space to install the
refrigerator on a flat surface;
• Allow clearance to the right, left, back
and top when installing. This will help
reduce power consumpt on and keep
your energy bills lower.
• It is advisable to keep at least 10mm
gap at two sides.
Placement
Install this appliance at a location where
the ambient temperature corresponds to
the climate class indicated on the rating
plate of the appliance:
For refrigerating appliances with climate
class:
- extended temperate: ‘this refrigerating
appliance is intended to be used at
ambient temperatures ranging from
10°C to 32°C (SN);
- temperate: ‘this refrigerating appliance
is intended to be used at ambient tem-
peratures ranging from 16°C to 32°C
(N);
- subtropical: ‘this refrigerating appliance
is intended to be used at ambient tem-
peratures ranging from 16°C to 38°C
(ST);
- tropical: ‘this refrigerating appliance is
intended to be used at ambient tem-
peratures ranging from 16°C to 43°C
(T);
Location
The appliance should be installed well away
from sources of heat such as radiators,
boilers, direct sunlight etc. Ensure that air
can circulate freely around the back of the
cabinet. To ensure best performance, if the
appliance is positioned below an overhang-
ing wall unit, the minimum distance be-
tween the top of the cabinet and the wall
unit must be at least 100 mm. Ideally,
however, the appliance should not be
positioned below overhanging wall units.
Accurate leveling is ensured by one or
Summary of Contents for SFS 272 W
Page 58: ......
