8
Safety Instructions and Warnings
Before starting the appliance, read the information given in the
User’s Guide carefully.
The User’s Guide contains very important observations relating to
the assembly, operation and maintenance of the appliance. Keep
the User’s Guide in a safe place and remember to hand it over to
the subsequent owner, if you ever sell the appliance.
The manufacturer does not accept responsibility for any damages
that may arise due to non-observation of the following instruc-
tion.
Damaged appliances are not to be put into operation. In case of
doubt, consult your supplier.
• Connection and installation of the appliance are not to be
carried out in strict compliance with the relative instructions
set forth in this User’s Guide.
• For the purpose of safety, the appliance must be properly
grounded in accordance with specifications.
• Always remember to unplug the appliance before cleaning.
To disconnect the appliance, pull at the plug itself, not the
cord.
• Keep alcoholic beverages in airtight bottles or containers and
always store in an upright position. In addition, do not store
any explosive substances inside the appliance.
Danger of
explosion.
• Do not damage any parts of the appliance that carry refriger-
ant by piercing or perforating the refrigerant’s grooves with
sharp or pointed items, crushing or twisting any tubes, or
scraping the coatings of the sufface. If the refrigerant spurts
out and gets into eyes, it may result in serious eye injuries.
• Do not obstruct or cover the ventilation grille of the appli-
ance.
• Do not allow children tp play with the appliance. In no case
should children be allowed to sit on the drawers or hang
onto the door.
• Should you have boought your new fridge/freezer to replace
an old appliance, please make sure that all existing latch or
bolt-locks on the old appliance are destroyed, before you
dispose of it.
• This will ensure that a child cannot get trapped inside.
• Please have the old appliance ecologially disposed of by a
company specialised in environmantal protection, since the
appliance may contain harmful components in the refriger-
ant and this must be removed with special equipment.
Please check with your dealer or with your local authority.
• Make sure that the refrigerant system containing the
refrigeant, especially the heat exchanger at the back of
the appliance, is not damaged during transportation to the
disposal or collection site, so that you can be sure that the
refrigerant does not leak out.
Details concerning the type of refrigerant/isolating agent
sue can be found on the appliance rating plate.
• Warning: Keep ventilation openings in the appliance enclo-
sure or in the structure for building in, clear of obstruction.
• Warning: Do not use mechanical devices or other means to
accelerate the defrosting process, other than those recom-
mended by the manufacturer.
• Warning: Do not damage the refrigerant circuit.
• Warning: Do not use electrical appliances inside the food
storage of the appliance.
• It is necessary to have the plug accessible after installation.
• If the supply cord is damaged, it must be replaced by a sup-
plied cord or assemply available form the manufacturer or
its service agent.
• Connection of power supply and installation should be con-
ducted in accordance with the instructions in the operation
manual.
• Only the tools gegulated by the manufaturer can be used for
defrosting.
Specifications
• This appliance is designed for food refrigeration, ice making
and frozen food storage.
• It is intended stricly for household use. If using it for indus-
trial or commercial purpose, be sure to observe the relevant
norms and regulations.
• The refrigerant circuit is leak-proof.
Product view
1 Shelves
2 Feets
3 Temperature Controller
4 Door
This diagram may vary slightly with the layout of the refrigerator
you have just purchased due to technical improvements.
