Scandomestic EMB34G4Q, User Manual

Page: 41 / 99

11. Programming Mode
This mode allows the user to assign cook times and power levels to the one touche button.
1) Open the door and press "1" pad for 5 seconds,the buzzer will sound once and enter to
Programming Mode.
Hold 0% "," Defrost 20%","Medium 50%" or "Med-Hi 70%" to input the power level,
will display the related power. If the same button has been pressed twice, the
power will change to full power. If no power be chosen, full power is default.
80%. "CF: " displays. If you need to change the cooking , just press one
the number buttons to set. If you press "0", "CF:10" will display.
When the program saved, "PROGRAM" display
" " to save the program, the buzzer will sound three times briefly
tell you the time is no use. And then
turn back to display "PROGRAM".
The time set before will be no change.
) Close the door, the oven will turn back to Ready Mode.
If press " " button during setting process, the oven turn to Door Open Mode.
The program that not saved will be lost. If there is program saved as memory procedure,
press the related number button, the saved program will start. If no saved program,
the buzzer will alarm when pressing number button and it will not work.
For example: set the program as memory cooking. Power level PL7 and cooking
time is 1 minute and 25 seconds.
Step1: Open the door, press number button "1" for 5 seconds,"PROGRAM" displays.
Step 2: Press number button "3", the screen will display "P:03",After two seconds,
Step 3: Press number buttons "1", "2" and "5" to input the cooking time.
Step 4: Press "Med-Hi/70% " button,"
" displays. Setting finished.
Step : Press " " to save. When use the program next time, just press "3",
the related program will start.
Note:
1. If the electricity is cut off, the saved program will not lost.
2. If the program need to reset , just repeat the above steps.
3. If press " " at the last step, it will turn back to Door Open Mode. The setting will be
5) After setting the time and power, press " ", the cooking program will be saved.
6) If all the cooking time exceeds the MAX.time User Option 7, when press
7
to
70
factor is
the screen
the screen
5
Note: et the time S first,then choose the power.
1:25
the screen will display the time " :30". related
3) Press "
4) To change the cooking factor: If press "X2", the screen will display "CF:XX". The default
08 factor
s.
of
invalid.
the time you need.
"PROGRAM" displays.
2) Press any number ,0 to 9,and the screen will display the saved time, then you can input
16